HPE ProLiant DL345 Gen11 - Rear panel with 2 SFF stacked drives

The rear panel with 4 LFF drive configuration is only supported when the front-end drives are also LFF.
ItemItem DescriptionDescription
1 LFF drives (optional)
2 Slot 21 OCP PCIe5 x8
3 Slot 3 PCIe5 x16 base riser
4 USB 3.2 Gen 1 ports
5 iLO management port
6 Serial port (optional)
7 NS204i-u boot device (optional)
8 Slot 22 OCP PCIe5 x8
9 Slot 6 PCIe5 x16 in low-profile riser
10 VGA port
11 Flexible Slot power supply 2 (optional)
12 Flexible Slot power supply 1
The server supports LFF SAS or SATA drives.
In Slot 21 OCP, the OCP bandwidth upgrade cable is required to support a x16 OCP expansion option.
This riser slot is in a primary riser cage.
This riser slot is in a secondary riser cage.
Rear panel with 2 SFF stacked drivesRear panel with 2 SFF stacked drives
The rear panel with 2 SFF stacked drive configuration is only supported when the front-end drives are also SFF.
1
2
3
4
1
2
3
4
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide 260