HPE ProLiant DL345 Gen11 - 36 E3.S drive configuration; iLO Service Port

ItemItem DescriptionDescription
1 Serial number/iLO information pull tab
2 SFF drives
3 iLO service port
4 USB 3.2 Gen 1 port
The serial number/iLO information pull tab is double-sided. One side shows the server serial number and the customer asset tag label.
The other side shows the default iLO account information.
Depending on the type of drive backplane installed , the server supports SFF SAS, SATA, or U.3 NVMe drives.
36 36 E3.S E3.S drive configurationdrive configuration
ItemItem DescriptionDescription
1 Serial number/iLO information pull tab
2 E3.S drives
3 iLO service port
4 USB 3.2 Gen 1 port
The serial number/iLO information pull tab is double-sided. One side shows the server serial number and the customer asset tag label.
The other side shows the default iLO account information.
SubtopicsSubtopics
iLO Service PortiLO Service Port
iLOiLO Service Port Service Port
When you have physical access to a server, you can use the Service Port to do the following:
Download the Active Health System Log to a supported USB flash drive.
When you use this feature, the connected USB flash drive is not accessible by the host operating system.
Connect a client (such as a laptop) with a supported USB to Ethernet adapter to access the following:
iLO web interface
Remote console
iLO RESTful API
CLI
1
2
1
2
1
1
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide 256