10. Remove the midwall bracket.
11. Remove the drive backplane bracket .
12. Remove the 4 LFF drive backplane from the drive backplane bracket.
Backplane for Box 1
Backplane for Box 2/3
ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing the 8 SFF drive backplaneRemoving and replacing the 8 SFF drive backplane
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
About this taskAbout this task
CAUTION:CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
To Next Page
Loading...
