HPE ProLiant DL345 Gen11 - 16 SFF drive configuration; 24 SFF drive configuration

ItemItem DescriptionDescription
1 Serial number/iLO information pull tab
2 iLO service port
3 USB 3.2 Gen 1 port
4 LFF drives
The serial number/iLO information pull tab is double-sided. One side shows the server serial number and the customer asset tag label.
The other side shows the default iLO account information.
The server supports LFF SAS or SATA drives.
16 SFF drive configuration16 SFF drive configuration
ItemItem DescriptionDescription
1 Serial number/iLO information pull tab
2 Optical drive (optional)
3 SFF drives
4 iLO service port
5 USB 3.2 Gen 1 ports
6 USB 2.0 port
7 DisplayPort 1.1a (optional)
8 2 SFF stacked drives (optional)
The serial number/iLO information pull tab is double-sided. One side shows the server serial number and the customer asset tag label.
The other side shows the default iLO account information.
Depending on the type of drive backplane installed , the front-end SFF drive boxes supports SAS, SATA, or U.3 NVMe drives.
The 2 SFF stacked drive cage option supports SAS, SATA, or U.3 NVMe drives.
24 SFF drive configuration24 SFF drive configuration
1
2
1
2
1
2
3
1
2
3
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide 255