HPE ProLiant DL345 Gen11 - System board assembly replacement; Removing the system board assembly; Prerequisites

6. Do one of the following:
a. Install the air baffle.
b. Install the midplane drive cage.
7. Install the access panel.
8. Install the server into the rack.
9. Connect all peripheral cables to the server.
10. Connect each power cord to the server.
11. Connect each power cord to the power source.
12. Power up the server .
13. If removed, install the front bezel.
System board assembly replacementSystem board assembly replacement
SubtopicsSubtopics
Removing the system board assemblyRemoving the system board assembly
Installing the system board assemblyInstalling the system board assembly
Re-entering the server serial number and product IDRe-entering the server serial number and product ID
Removing the system board assemblyRemoving the system board assembly
PrerequisitesPrerequisites
Perform a backup of critical server data .
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide 225