HPE ProLiant DL385 Gen10 - Expansion Slots; Supported Pcie Form Factors

To install the riser in the secondary position, install the secondary riser cage.
7. Connect data cables to the drive backplane.
Expansion slots
Supported PCIe form factors
All slots support full-height expansion cards. Use the following information to find supported lengths for
each slot.
Slot description example
Primary riser connector
PCIe slot and card
length
3-slot riser* 2-slot riser (Optional) 2-slot riser (Optional)
Slot 1 - Full-length/Full-
height (FL/FH)
PCIe3 x8 (8, 4, 2, 1) — PCIe3 x16 (16, 8, 4, 2,
1)
Slot 2 - Half-length/Full-
height (HL/FH)
PCIe3 x16 (16, 8, 4, 2,
1)
PCIe3 x16 (16, 8, 4, 2,
1)
PCIe3 x16 (16, 8, 4, 2,
1)
Slot 3 - Half-length/Full-
height (HL/FH)
PCIe3 x8 (8, 4, 2, 1) PCIe3 x16 (16, 8, 4, 2,
1)
—
*The server ships with one PCIe3 riser cage installed in the primary riser cage connector.
Secondary riser connector
PCIe slot and card
length
3-slot riser* 2-slot riser (Optional) 2-slot riser (Optional)
Slot 4 - Full-length/Full-
height (FL/FH)
PCIe3 x8 (8, 4, 2, 1) — PCIe3 x16 (16, 8, 4, 2,
1)
Slot 5 - Half-length/Full-
height (HL/FH)
PCIe3 x16 (16, 8, 4, 2,
1)
PCIe3 x16 (16, 8, 4, 2,
1)
PCIe3 x16 (16, 8, 4, 2,
1)
Slot 6 - Half-length/Full-
height (HL/FH)
PCIe3 x8 (8, 4, 2, 1) PCIe3 x16 (16, 8, 4, 2,
1)
—
104 Expansion slots