HPE ProLiant DL385 Gen10 - System Maintenance Switch Descriptions

Item Description
5 M.2 connectors (x2)
6 Dual USB port
7 x1 SATA port 4
8 Optical/SATA port 5
9 Front power/USB 3.0 connector
10 Drive backplane power connectors
11 Smart Storage Battery connector
12 Chassis Intrusion Detection connector
13 Drive backplane power connector
14 microSD card slot
15 NVMe connector (port 7b)
16 NVMe connector (port 8b)
17 Flexible Smart Array connector
18 Secondary (processor 2) PCIe riser connector
1
19 System battery
20 Tertiary (processor 2) PCI riser connector
1
21 TPM connector
22 Serial port connector
1
Requires a second processor.
System maintenance switch descriptions
Position Default Function
S1
1
Off
• Off = iLO security is enabled.
• On = iLO security is disabled.
S2 Off
• Off = System configuration can be changed.
• On = System configuration is locked.
S3 Off Reserved
S4 Off Reserved
S5 Off
• Off = Power-on password is enabled.
• On = Power-on password is disabled.
Table Continued
System maintenance switch descriptions 21