Do not remove an NVMe SSD from the drive bay while the Do Not Remove button LED is flashing.
The Do Not Remove button LED flashes to indicate that the device is still in use. Removal of the
NVMe SSD before the device has completed and ceased signal/traffic flow can cause loss of data.
• Drives with the same capacity provide the greatest storage space efficiency when grouped into the
same drive array.
Supported drive carriers
Depending on the drive cage, the server supports the following drive carriers:
• SFF Smart Carrier (SC)
• SFF Smart Carrier NVMe (SCN)
• SFF Smart Carrier M.2 (SCM)
• LFF Smart Carrier (SC)
• LFF to SFF Smart Carrier Converter
Installing a hot-plug SAS or SATA drive
Procedure
1. Remove the drive blank.
2. Prepare the drive.
3. Install the drive.
58 Supported drive carriers
To Next Page
Loading...
