Installing a Smart Storage Battery
Prerequisites
Before installing this option, be sure that you have the following:
The components included with the hardware option kit
Procedure
1. Power down the server .
2. Do one of the following:
• Disconnect each power cord from the power source.
• Disconnect each power cord from the server.
3. Do one of the following:
• Extend the server from the rack.
• Remove the server from the rack.
4. Remove the access panel.
5. Do one of the following:
• Remove the air baffle.
• If installed on LFF models, remove the midplane drive cage.
6. Install the Smart Storage battery.
Installing a Smart Storage Battery 115
To Next Page
Loading...
