8. Install the drive cage:
a. Remove all drives and drive blanks.
b. Install the drive cage.
9. Install the associated NVMe riser.
10. Connect the power cable to the drive backplane power connector.
11. Connect the data cables from the drive backplane to the NVMe riser.
12. Install drives or drive blanks.
The installation is complete.
Installing a front 6SFF SAS/SATA + 2NVMe Premium drive cage
The drive cage can be installed in any box. This procedure covers installing the drive cage in box 1.
Installing a front 6SFF SAS/SATA + 2NVMe Premium drive cage 75
To Next Page
Loading...
