EasyManua.ls Logo

HPE ProLiant DL385 Gen10 - Memory Options; Memory-Processor Compatibility Information

HPE ProLiant DL385 Gen10
177 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7. Install the air baffle.
8. Install the access panel.
9. Install the server into the rack.
Memory options
IMPORTANT:
This server does not support mixing LRDIMMs and RDIMMs. Attempting to mix any combination of
these DIMMs can cause the server to halt during BIOS initialization. All memory installed in the
server must be of the same type.
Memory-processor compatibility information
The server processor determines the type of DIMM that will be supported in the server.
For the latest memory configuration information, see the product QuickSpecs on the Hewlett Packard
Enterprise website.
DIMM specifications
DIMM specifications for AMD (X) processor
Type Rank Capacity (GB) Native speed
(MT/s)
Voltage
RDIMM Single 8, 16 2666 STD
RDIMM Dual 16, 32 2666 STD
LRDIMM Quad 64 2666 STD
LRDIMM Octal 128 2666 STD
Maximum memory capacity
The maximum memory capacity is a function of the DIMM capacity, number of installed DIMMs, memory
type, and number of installed processors.
Memory options 65

Table of Contents

Other manuals for HPE ProLiant DL385 Gen10

Related product manuals