EasyManua.ls Logo

Huawei AR3200 Series - Page 149

Huawei AR3200 Series
275 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Procedure
Step 1 Create VLANs and configure interfaces on the Router.
# Create VLAN 2 and VLAN 6.
<Huawei> system-view
[Huawei] vlan batch 2 6
# Configure the link type and default VLAN of Ethernet2/0/1.
[Huawei] interface ethernet 2/0/1
[Huawei-Ethernet2/0/1] port hybrid pvid vlan 6
[Huawei-Ethernet2/0/1] port hybrid untagged vlan 6
[Huawei-Ethernet2/0/1] quit
# Create VLANIF 2 and assign IP address 192.168.2.1/24 to VLANIF 2.
[Huawei] interface vlanif 2
[Huawei-Vlanif2] ip address 192.168.2.1 24
[Huawei-Vlanif2] quit
# Assign IP address 192.168.4.1/24 to GE3/0/0.
[Huawei] interface gigabitethernet 3/0/0
[Huawei-GigabitEthernet3/0/0] ip address 192.168.4.1 24
[Huawei-GigabitEthernet3/0/0] quit
Step 2 Configure the voice VLAN on the Router.
# Enable the voice VLAN on Ethernet2/0/1.
[Huawei] interface ethernet 2/0/1
[Huawei-Ethernet2/0/1] voice-vlan 2 enable
# Configure the mode in which Ethernet2/0/1 is added to the voice VLAN.
[Huawei-Ethernet2/0/1] voice-vlan mode manual
[Huawei-Ethernet2/0/1] port hybrid tagged vlan 2
[Huawei-Ethernet2/0/1] quit
# Configure the OUI of the voice VLAN.
[Huawei] voice-vlan mac-address 0011-2200-0000 mask ffff-ff00-0000
# Configure the working mode of the voice VLAN.
[Huawei] interface ethernet 2/0/1
[Huawei-Ethernet2/0/1] voice-vlan security enable
Step 3 Configure a traffic policy and apply it to the inbound interface of voice data packets.
# Configure traffic classifier c1 on the Router.
[Huawei] traffic classifier c1 operator and
[Huawei-classifier-c1] if-match source-mac 0011-2200-0000 mac-address-mask ffff-
ff00-0000
[Huawei-classifier-c1] if-match vlan-id 2
[Huawei-classifier-c1] quit
# Configure traffic behavior b1 on the Router to re-mark the priority of voice data packets.
[Huawei] traffic behavior b1
[Huawei-behavior-b1] remark dscp 46
[Huawei-behavior-b1] quit
# Create traffic policy p1 on the Router, bind the traffic behavior and traffic classifier to the
traffic policy, and apply the traffic policy to the inbound direction of Ethernet2/0/1.
Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN 4 Voice VLAN Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
138

Table of Contents

Related product manuals