EasyManua.ls Logo

Huawei AR3200 Series - Page 82

Huawei AR3200 Series
275 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Data Preparation
To complete the configuration, you need the following data:
l Interfaces used to connect LANs
l Number of each bridge group to which the LANs that need to communicate with each other
are added
Configuration Procedure
l Configure the IP routing function.
1. Configure RouterA.
# Create bridge group 1 and bridge group, then enable the IP routing function for the
bridge groups.
<Huawei> system-view
[Huawei] sysname RouterA
[RouterA] bridge 1
[RouterA-bridge1] routing ip
[RouterA-bridge1] quit
[RouterA] bridge 2
[RouterA-bridge2] routing ip
[RouterA-bridge2] quit
# Add Eth2/0/1 and Eth2/0/2 to VLAN 11 to allow the communication between User
1 and User 2.
[RouterA] vlan 11
[RouterA-vlan11] quit
[RouterA] interface ethernet 2/0/1
[RouterA-Ethernet2/0/1] port link-type access
[RouterA-Ethernet2/0/1] port default vlan 11
[RouterA-Ethernet2/0/1] quit
[RouterA] interface ethernet 2/0/2
[RouterA-Ethernet2/0/2] port link-type access
[RouterA-Ethernet2/0/2] port default vlan 11
[RouterA-Ethernet2/0/2] quit
#Add VLANIF 11 to bridge group 1.
[RouterA] interface vlanif 11
[RouterA-Vlanif11] bridge 1
[RouterA-Vlanif11] quit
# Add GE3/0/0 on Router A to bridge group 2.
[RouterA] interface gigabitethernet 3/0/0
[RouterA-GigabitEthernet3/0/0] bridge 2
[RouterA-GigabitEthernet3/0/0] quit
# Create Bridge-if interface 1 for bridge group 1 and Bridge-if interface 2 for bridge
group 2, and then configure IP addresses for the two Bridge-if interfaces.
[RouterA] interface bridge-if 1
[RouterA-Bridge-if1] ip address 1.1.1.3 255.255.255.0
[RouterA-Bridge-if1] quit
[RouterA] interface bridge-if 2
[RouterA-Bridge-if2] ip address 2.1.1.3 255.255.255.0
[RouterA-Bridge-if2] quit
2. Configure RouterB.
# Create bridge group 2 and enable the IP routing function for the bridge groups.
<Huawei> system-view
[Huawei] sysname RouterB
[RouterB] bridge 2
[RouterB-bridge2] routing ip
[RouterB-bridge2] quit
Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN 2 Transparent Bridging Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
71

Table of Contents

Related product manuals