Huawei AR3200 Series - Page 83

# Add Eth2/0/0 to VLAN11.
[RouterB] vlan 11
[RouterB-vlan11] quit
[RouterB] interface ethernet 2/0/0
[RouterB-Ethernet2/0/0] port link-type access
[RouterB-Ethernet2/0/0] port default vlan 11
[RouterB-Ethernet2/0/0] quit
#Add VLANIF 11 to bridge group 2.
[RouterB] interface vlanif 11
[RouterB-Vlanif11] bridge 2
[RouterB-Vlanif11] quit
# Add GE3/0/0 on Router B to bridge group 2.
[RouterB] interface gigabitethernet 3/0/0
[RouterB-GigabitEthernet3/0/0] bridge 2
[RouterB-GigabitEthernet3/0/0] quit
3. Verify the configuration.
# After the preceding configuration is complete, User 1 and User 4 can successfully
ping each other.
Configuration Files
Configuration file of RouterA
#
sysname RouterA
#
bridge 1
routing ip
bridge 2
routing ip
#
interface Vlanif11
bridge 1
#
interface Ethernet2/0/1
port link-type access
port default vlan 11
#
interface Ethernet2/0/2
port link-type access
port default vlan 11
#
interface Bridge-if1
ip address 1.1.1.3 255.255.255.0
#
interface Bridge-if2
ip address 2.1.1.3 255.255.255.0
#
interface GigabitEthernet3/0/0
bridge 2
#
return
Configuration file of RouterB
#
sysname RouterB
#
bridge 2
routing ip
#
interface Vlanif11
Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN 2 Transparent Bridging Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
72