Figure 6-51 Installing a new chassis intelligent display
6. Use a Phillips screwdriver to tighten the captive screws on the front panel of the chassis
intelligent display. See (2) in Figure 6-51.
By now the chassis intelligent display secured by the front captive screws is replaced.
7. Use a Phillips screwdriver to loosen the screws on both sides of the chassis. See (1) in
Figure 6-52.
E9000 Server
User Guide
6 Parts Replacement
Issue 25 (2019-11-30) Copyright © Huawei Technologies Co., Ltd. 145
To Next Page
Loading...
