1. Check the captive screws on the front panel of the chassis intelligent display.
– If the captive screws on the front panel of the chassis intelligent display are
tightened or can be tightened, perform 2 to 6.
– If the front panel of the chassis intelligent display does not have captive screws or
the captive screws cannot be tightened, perform 7 to 11.
2. Use a Phillips screwdriver to loosen the captive screws on the front panel of the chassis
intelligent display. See (1) in Figure 6-50.
Figure 6-50 Removing the chassis intelligent display
3. Horizontally pull the chassis intelligent display out of the chassis. See (2) in Figure
6-50.
4. Place the removed chassis intelligent display into an ESD bag.
5. Horizontally insert the new chassis intelligent display into the chassis. See (1) in Figure
6-51.
E9000 Server
User Guide
6 Parts Replacement
Issue 25 (2019-11-30) Copyright © Huawei Technologies Co., Ltd. 144
To Next Page
Loading...
