EasyManuals Logo

Huawei iSitePower-M User Manual

Huawei iSitePower-M
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Do not place irrelevant objects on the top of the equipment or insert them
into any position of the equipment.
Do not place inammables around the equipment.
To prevent explosions and body injury, do not place batteries in a re.
Do not place the battery module in water or other liquids.
Do not short-circuit wiring terminals of batteries. Short circuits can cause a
re.
Do not short-circuit the AC output port to avoid personal injury and device
damage caused by cable burning.
Batteries may cause electric shocks and high short-circuit currents. When
using the battery, pay attention to the following points:
(a) Remove any metal objects from yourself, such as watches and rings.
(b) Use tools with insulated handles.
(c) Wear rubber gloves and boots.
(d) Do not place tools or metal parts on top of batteries.
(e) Before connecting or disconnecting battery terminals, disconnect the
charging power supply.
(f) Check whether batteries are accidentally grounded. If it is accidentally
grounded, remove the power supply from the ground. Touching any part of a
grounded battery can cause an electric shock. If these grounding points are
removed during installation and maintenance, the possibility of electric shocks
can be reduced.
Do not use water to clean electrical components inside or outside of a
cabinet.
Do not stand on, lean on, or sit on the top of the equipment.
Do not damage the modules of the equipment.
If a battery module is dropped or violently impacted during installation,
dispose of the battery module. Safety risks such as cell leakage and electric
shock may occur if a damaged battery module is used.
Handling Battery Leakage
Avoid contact with leaked liquids or gases in case of battery leakage. Electrolyte is
corrosive and can cause irritation and chemical burns. Should you come into direct
contact with the leaked battery electrolyte, do as follows:
Inhalation: Evacuate contaminated areas, get fresh air immediately, and seek
immediate medical attention.
Eye contact: Immediately
ush your eyes with water for at least 15 minutes, do
not rub your eyes, and seek medical attention immediately.
Skin contact: Wash the
aected areas immediately with soap and water and seek
medical attention immediately.
Intake: Ask for medical help immediately.
iSitePower-M (MAP05A1, MAB05B1)
User Manual 2 Safety Precautions
Issue 02 (2021-12-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 5

Table of Contents

Other manuals for Huawei iSitePower-M

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei iSitePower-M and is the answer not in the manual?

Huawei iSitePower-M Specifications

General IconGeneral
Storage Temperature-40°C to +70°C
Product NameHuawei iSitePower-M
TypePower System
Efficiency≥96%
Output Voltage-48 V DC
Operating Temperature-40°C to +55°C
Relative Humidity5% to 95% (non-condensing)
AltitudeUp to 4000 m
Cooling MethodForced Air Cooling
Protection FeaturesOvervoltage, undervoltage, overcurrent, short circuit, overtemperature
CertificationsCE, UL, TUV
Input Voltage Range85 V - 300 V AC

Related product manuals