● When drilling holes, protect the equipment from shavings. After drilling, clean
up any shavings that have accumulated inside or outside the equipment.
Moving Heavy Objects
● Be cautious to avoid injury when moving heavy objects.
● When moving the equipment by hand, wear protective gloves to prevent
injuries.
2.7 Commissioning
When the equipment is powered on for the rst time, ensure that professional
personnel set parameters correctly. Incorrect settings may result in inconsistency
with local certication and aect the normal operation of the equipment.
2.8 Maintenance and Replacement
High voltage generated by the equipment during operation may cause an electric
shock, which could result in death, serious injury, or serious property damage.
Prior to maintenance, power
o the equipment and strictly comply with the safety
precautions in this document and relevant documents.
● Maintain the equipment with sucient knowledge of this document and
using proper tools and testing equipment.
● Before maintaining the equipment, power it
o and follow the instructions on
the delayed discharge label to ensure that the equipment is powered o.
● Place temporary warning signs or erect fences to prevent unauthorized access
to the maintenance site.
● If the equipment is faulty, contact your dealer.
● The equipment can be powered on only after all faults are
rectied. Failing to
do so may escalate faults or damage the equipment.
● Do not open the cover without authorization. Otherwise, electric shocks may
occur, and the resulting faults are beyond warranty scope.
● Installation personnel, maintenance personnel, and technical support
personnel must be trained to operate and maintain the equipment safely and
correctly, take comprehensive precautionary measures, and be equipped with
protective instruments.
● Before moving or reconnecting the equipment, disconnect the mains and
batteries and wait for
ve minutes until the equipment powers o. Before
iSitePower-M (MAP05A1, MAB05B1)
User Manual 2 Safety Precautions
Issue 02 (2021-12-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 11
To Next Page
