Huawei iSitePower-M User Manual

8.2.1 Installing the App
Prerequisites
● A mobile phone running Android 8.0 or later is available.
● The app cannot be installed on a tablet, folding screen, or landscape screen
device.
Downloading and Installing the NetEco App
● Method 1: Search for NetEco in Huawei AppGallery and download the latest
installation package.
● Method 2: Scan the QR code to download and install the latest installation
package.
Figure 8-1 QR code
8.2.2 New Site Deployment
Refer to iSitePower-M App Quick Guide to perform installer registration, app
commissioning, site deployment, and owner adding. You can scan the QR code to
obtain
iSitePower-M App Quick Guide .
iSitePower-M (MAP05A1, MAB05B1)
User Manual 8 System Commissioning
Issue 02 (2021-12-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 82

Huawei iSitePower-M Specifications

General

Storage Temperature	-40°C to +70°C
Product Name	Huawei iSitePower-M
Type	Power System
Efficiency	≥96%
Output Voltage	-48 V DC
Operating Temperature	-40°C to +55°C
Relative Humidity	5% to 95% (non-condensing)
Altitude	Up to 4000 m
Cooling Method	Forced Air Cooling
Protection Features	Overvoltage, undervoltage, overcurrent, short circuit, overtemperature
Certifications	CE, UL, TUV
Input Voltage Range	85 V - 300 V AC