Huawei iSitePower-M User Manual

Handling Fires
● If a re occurs, power o the system if it is safe to do so.
● Extinguish the re with carbon dioxide, FM-200 or ABC dry powder re
extinguishers.
● Ask
reghters to avoid contact with high-voltage components during re
ghting
to prevent the risk of electric shock.
D ANGER
Overheating may cause batteries to deform and leak corrosive electrolyte or toxic
gas. Keep away from the batteries to avoid skin irritation and chemical burns.
Handling Floods
● Power o the system if it is safe to do so.
● If any part of the batteries is submerged in water, do not touch the batteries
to avoid electric shock.
● Do not use batteries that have been soaked in water. Contact a battery
recycling company for disposal.
Battery Recycling
● Dispose of waste batteries in accordance with local laws and regulations. Do
not dispose of batteries as household waste.
● If the batteries leak or have bulges, contact technical support or a battery
recycling company for disposal.
● If the batteries are out of service life, contact a battery recycling company for
disposal.
● Do not expose batteries to high temperatures or direct sunlight.
● Do not expose batteries to high humidity or corrosive environments.
2.2 Personnel Requirements
● Personnel who plan to install or maintain the equipment must receive
thorough training, understand all necessary safety precautions, and be able to
correctly perform all operations.
● Only
qualied professionals or trained personnel are allowed to install,
operate, and maintain the equipment.
● Only qualied professionals are allowed to remove safety facilities and inspect
the equipment.
● Personnel who will operate the equipment, including operators, trained
personnel, and professionals, should possess the local national required
qualications in special operations such as high-voltage operations, working
at heights, and operations of special equipment.
● Only professionals or authorized personnel are allowed to replace the
equipment or components (including software).
iSitePower-M (MAP05A1, MAB05B1)
User Manual 2 Safety Precautions
Issue 02 (2021-12-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 6

Huawei iSitePower-M Specifications

General

Storage Temperature	-40°C to +70°C
Product Name	Huawei iSitePower-M
Type	Power System
Efficiency	≥96%
Output Voltage	-48 V DC
Operating Temperature	-40°C to +55°C
Relative Humidity	5% to 95% (non-condensing)
Altitude	Up to 4000 m
Cooling Method	Forced Air Cooling
Protection Features	Overvoltage, undervoltage, overcurrent, short circuit, overtemperature
Certifications	CE, UL, TUV
Input Voltage Range	85 V - 300 V AC