Huawei iSitePower-M User Manual

● If there is PV input, turn on the DC SWITCH.
● If there is no PV input, hold down the manual ON/OFF switch for 5s.
Step 2 Turn the AC input switch to ON.
Step 3 Observe the annular strip light. If all green lights are steady on, battery charging is
complete.
Step 4 After the charge is complete, turn
o the upstream AC input circuit breaker of the
iSitePower-M system and then the DC SWITCH. Hold down the manual ON/OFF
switch for 5s to shut down the battery module. If other batteries need to be
charged, repeat the preceding steps.
----End
iSitePower-M (MAP05A1, MAB05B1)
User Manual 9 System Maintenance
Issue 02 (2021-12-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 91

Huawei iSitePower-M Specifications

General

Storage Temperature	-40°C to +70°C
Product Name	Huawei iSitePower-M
Type	Power System
Efficiency	≥96%
Output Voltage	-48 V DC
Operating Temperature	-40°C to +55°C
Relative Humidity	5% to 95% (non-condensing)
Altitude	Up to 4000 m
Cooling Method	Forced Air Cooling
Protection Features	Overvoltage, undervoltage, overcurrent, short circuit, overtemperature
Certifications	CE, UL, TUV
Input Voltage Range	85 V - 300 V AC