a: The specifications of the sealant or seal tape for screw threads are as follows:
The sealant or seal tape for screw threads must be able to withstand temperatures higher
than 85°C.
The sealant or seal tape should apply to all pipe material.
Anaerobic metal pipe thread sealant with polytetrafluorethylene (PTFE for short) as the
filler.
The glycol solution resistance and adapt to the thread size with pipeline.
Maximum seal gap is less than 0.5 mm.
The maximum pressure is greater than 3 MPa.
Conforms to JB/T7311-2008 "engineering mechanical the anaerobic adhesive
application technology specification" profession standard.