Huawei NetCol5000-A-035 - Installing Cabinet Accessories; Optional) Installing an Enclosure Frame

NetCol5000-A(025, 035) In-row Air Cooled Smart
Cooling Product
User Manual (600 mm)
3 Installation Guide
Issue 13 (2019-01-15)
Copyright © Huawei Technologies Co., Ltd.
59
For scenarios where a container is transported without refrigerant, keep 0.3 to 0.4 MPa of nitrogen in the
pipe.
----End
3.10 Installing Cabinet Accessories
To expand an indoor unit to 1200 mm deep, install an enclosure frame. To expand an indoor
unit to 2200 mm high, install an top frame.
3.10.1 (Optional) Installing an Enclosure Frame
Procedure
Step 1 Open the front door. Remove the power cable of the display screen and the ground cable for
the front door. Then pull the front door upwards and remove it.
Step 2 Remove one bolt fixing plate, two connection plates, and two hinges.
Step 3 Move the enclosure frame to the front door, and adjust the anchor bolts of the enclosure frame
to ensure that the enclosure frame has the same height with the cabinet.
Step 4 Secure the enclosure frame to the front door using eight M5 screws, as shown in Figure 3-34.