User Manual
SmartAX MT800 ADSL CPE
Chapter 1 Basic Information
1-2
1.1.3 Ethernet Port (NIC Adapter)
Computer is connected to the MT800 through the Ethernet port
on the MT800. Ensure your computer is configured with NIC adapter.
Besides, be sure to enable the TCP/IP protocol for your operating
system.
1.1.4 Account Information
For PPP connections you have to keep user name and
password to connect to your ISP. This information is stored either in
the MT800’s memory or on your computer depending on the type of
ADSL connection you have.
1.2 Packing List
Open the shipping carton and carefully remove all items.
Ascertain that you have:
1) One SmartAX MT800 ADSL CPE
2) Two twisted-pair telephone cables used for connect to
ADSL line and Phone.
3) One straight-through Ethernet cable
4) One AC power adapter
5) One Quick Installation Guide
6) One Warranty Card
To Next Page
Loading...
