User Manual
SmartAX MT800 ADSL CPE
Chapter 8 Appendix
8-1
Chapter 8 Appendix
8.1 Appendix A Factory Default Settings
User name admin
Password admin
IP address 192.168.1.1
Subnet mask 255.255.255.0
DSL Mode Multimode
PVC0 RFC 2684 Bridged Mode VPI =0 VCI=35
PVC1 RFC 2684 Bridged Mode VPI =8 VCI=35
PVC2 RFC 2684 Bridged Mode VPI= 0 VCI= 100
PVC3 RFC 2684 Bridged Mode VPI =0 VCI=32
PVC4 RFC 2684 Bridged Mode VPI =8 VCI=81
PVC5 RFC 2684 Bridged Mode VPI= 8 VCI=32
PVC6 RFC 2684 Bridged Mode VPI= 14 VCI=24
DHCP Mode Disable
NAT Enable (NAT session up to 1009)
8.2 Appendix B Abbreviations
ADSL Asymmetric Digital Subscriber Line
ATM Asynchronous Transfer Mode
CPE Customer Premises Equipment
DHCP Dynamic Host Configuration Protocol
DNS Domain Name Server
DSLAM Digital Subscriber Line Access Multiplex
HTML Hypertext Markup Language
IP Internet Protocols
ICMP Internet Control Message Protocol
IPoA Internet Protocols Over ATM
ISP Internet Service Provider
LAN Local Area Network
MA Media Access Module
MAC Media Access Control
MIB Management Information Base
To Next Page
Loading...
