User Manual
SmartAX MT800 ADSL CPE
Chapter 4 Web-based Management
4-4
The System View read-only table on the Home Page displays a
summary of various system settings and functions as described in
the table below.
Device
Displays the basic information about the device hardware and software
versions, etc.
DSL Status
Displays the operational status, working mode, software version, and
performance statistics for the DSL line.
WAN Interface
Displays the names and settings for the device WAN interfaces. Multiple
software-defined interfaces may be configured to use the DSL
connection. In the WAN interface will display the PVC number, gateway,
IP address, mask, VPI/VCI, encapsulation and status.
LAN Interface
Displays the names and various settings of LAN interface, which include
MAC address, IP address, speed, duplex and status.
Services
Summary
Displays the following services that the ADSL terminal performs to help
you manage your network:
NAT
IP Filter
DHCP status including DHCP Relay, DHCP Server or DHSCP Client.
RIP
IGMP
4.3 ATM Setting
Click the hyperlink “ATM Setting” in wizard column to open the
ATM setting page. There are three basic configuring modes for
selection in this web page: RFC2684 Bridged, RFC2684 Routed
(IPoA) and PPP.
4.3.1 RFC2684 Bridged Connection
Bridged connections include three modes: Pure Bridge, Static
Bridge and DHCP.
To Next Page
Loading...
