User Manual
SmartAX MT800 ADSL CPE
Chapter 4 Web-based Management
4-37
To block a protocol, click the appropriate check box, and click
the Submit button to save the settings in RAM. To save these
configuration changes permanently, enter the Save & Reboot page,
select Save and click Submit button to save the setting.
4.14 Diagnostics
The diagnostics feature executes a series of test of your system
software and hardware connections. Use this feature when working
with your ISP to troubleshoot problems. Click the Diagnostics of
Advance Functions in the Wizard column to perform the basic
diagnostics for system.
Figure 4-21 Diagnostics Window
Select the Virtual Circuit and click the Submit button. A
message will appear, informing you whether the loop test succeeded
or failed.
To Next Page
Loading...
