User Manual
SmartAX MT800 ADSL CPE
Chapter 4 Web-based Management
4-17
4.9 NAT Configuration
Network Address Translation is a method for disguising the
private IP addresses you use on your LAN as the public IP address
you use on the Internet. You define NAT rules that specify exactly
how and when to translate between public and private IP addresses.
Click the NAT of Other Setting in the Wizard Column to set the
NAT. NAT is enabled by default. You can enable or disable NAT by
selecting the Enable or Disable option in the configuration page and
submitting the settings.
Figure 4-13
NAT Configuration
To configure NAT Rules, select the NAT Rule Entry option and
click the Add button. A new window is displayed:
To Next Page
Loading...
