User Manual
SmartAX MT800 ADSL CPE
Chapter 4 Web-based Management
4-15
Figure 4-11 DNS Configuration
4.8 IP Route Table Configuration
Click the IP Route of Other Setting in the Wizard Column to set
the IP Route Table. IP Routes are used to define gateways and hops
used to route data traffic. Most users will not need to use this feature
as the previously configured default gateway and LAN IP settings on
your host computers should be sufficient.
You may need to define routes if your LAN includes two or more
networks or subnets, if you connect to two or more ISP services, or if
you connect to a remote corporate LAN. Use the IP Route Table to
Add new IP routes.
To Next Page
Loading...
