User Manual
SmartAX MT800 ADSL CPE
Chapter 4 Web-based Management
4-40
If you need to delete a user, click the icon in the operation
column that the user located to delete the user.
4.16 Save & Reboot
Click the Save & Reboot in Wizard column to specify the
method of restart. Whenever you modifies the settings on MT800,
the result of changes will be saved in the flash. And most of the
changes (except the change of ADSL mode) will take effect
immediately after it is submitted. However, with reset or turn off the
device, the saved changes will be erased.
To save the changes to permanent storage, select Save and
click Submit in the Save & Reboot page.
Figure 4-24
Save & Reboot
The options are described as below:
Save Save the current setting into the permanent storage
Reboot
A simple reboot. This will put into effect any configuration
changes that have been successfully saved to flash memory.
Factory Setting Reboot
This reboots the device to default settings provided by your
ISP or the manufacturer. Choosing this option erases any
custom settings.
To Next Page
Loading...
