Huawei SmartAX MT800 ADSL CPE - 4.12 IP Filter Configuration; 4.12.1 IP Filter Global Settings

User Manual
SmartAX MT800 ADSL CPE
Chapter 4 Web-based Management
4-26
z
IPF Rule ID
: If the packet violated an IP Filter rule, this field
will display the ID assigned to the rule.
4.12 IP Filter Configuration
The IP filter feature enables you to create rules that control the
forwarding of incoming and outgoing data between your LAN and the
Internet and within your LAN.
4.12.1 IP Filter Global Settings
The IP Filter Configuration page displays global settings that
you can modify, and the IP Filter rule table, which shows all currently
established rules.
Click the
IP Filter
of
Advanced Functions
in the Wizard
Column to set the IP filter.
Figure 4-18 IP Filter Configuration
The IP Filter Configuration page enables you to configure the
following IP filter global settings.