User Manual
SmartAX MT800 ADSL CPE
Chapter 2 Introduction
2-3
ADSL LINK
Steady green light indicates a valid ADSL connection.
ADSL ACT Blinking green light indicates there is traffic over ADSL line.
LAN LINK Steady green light and orange light indicates a valid LAN connection. The
green light indicates that the speed of data transfer is 10Mbps; the orange light indicates
that the speed of data transfer is 100Mbps.
LAN ACT Blinking green light indicates there is traffic over Ethernet.
2.1.3 Rear Panel
All cable connections to the MT800 are made at the rear panel.
A switch and reset button are located here as well. The device
includes a built-in low pass filter so that you may attach a telephone
directly to it.
Figure 2-3 Rear Panel Cable and Power Connections
2.2 Hardware Installation
In this chapter you will learn about the various connections you
will need to make in order to use MT800.
To Next Page
Loading...
