User Manual
SmartAX MT800 ADSL CPE
Chapter 4 Web-based Management
4-11
z
Operation Mode:
This also should be left at the default
setting
Enabled
. This enables the PVC used for the initial
connection.
z
Encapsulation:
You can select the mode LLC or VC MUX.
z
Default Route:
This setting specified the IP address listed
upon is using for default route of LAN. The data will be sent
through WAN interface whenever a client LAN computer
accesses the Internet.
z
Security Protocol:
PAP and CHAP.
z
Username
and
Password:
Enter the username and
password provided by ISP.
z
Use DNS:
It is recommended to keep this option as
Enable.
Figure 4-7 PPP configuration
To Next Page
Loading...
