Chapter 3 • Installing the HN7000S remote terminal
14
1037076-0001 Revision C
5. Click LAN Settings to access the Local Area Network
(LAN) Settings dialog shown in
Figure 7.
6. If the check box labeled Use a proxy server for your LAN
(These settings will not apply to dial-up or VPN
connections)
is checked, uncheck it. See Figure 7.
7. Click OK to close the Local Area Network (LAN) Settings
dialog.
8. Click OK to close the Internet Options dialog.
9. Close Internet Explorer.
10. Relaunch Internet Explorer to enable the changes.
Netscape
1. Turn the computer on.
2. Open Netscape.
3. Select Edit
→
Preferences to access the Preferences window
shown in
Figure 8.
4. In the Category pane, select Advanced
→
Proxies.
5. Select the Direct connection to the Internet radio button.
6. Click OK.
7. Close Netscape.
8. Relaunch Netscape to enable the changes.
Figure 7: Accessing LAN settings
To Next Page
Loading...
Need help?
General