Chapter 3 • Installing the HN7000S remote terminal
16
1037076-0001 Revision C
Windows XP
1. Click Start→ Settings→ Control Panel and double-click the
Network Connections icon.
A list of network adapters appears. At least one Local Area
Connection must appear under LAN or High-Speed Internet (see
Figure 9). If not, the network is not installed correctly.
2. Right-click the Local Area Connection icon that represents
the Network adapter used to connect the computer to the
Satellite Gateway, and select
Properties.
3. Ensure that the Client for Microsoft Networks and Internet
Protocol (TCP/IP)
are installed and checked. See Figure 10. If
NetBEUI appears in the list, uninstall it.
Note: If Control Panel is in Category view, select Network
and Internet Connections, then select Network Connections.
Figure 9: Network Connections
Note: If the Local Area Connection icon appears with a red
X, check your connections. You cannot successfully configure
your system if the red X is present.
To Next Page
Loading...
Need help?
General