Chapter 3 • Installing the HN7000S remote terminal
1037076-0001 Revision C
23
5. Select Obtain an IP address automatically.
6. Select the Gateway tab. Remove any installed gateways by
selecting them and clicking Remove.
See Figure 18.
7. Select the DNS Configuration tab.
8. Select the Disable DNS button.
9. Click OK to update the TCP/IP properties.
10. Click OK to close the list of network components. Windows
may request that you insert the installation CD-ROM to
complete updating the TCP/IP settings.
11. Restart the computer if it does not do so automatically.
Figure 18: Gateway tab
To Next Page
Loading...
Need help?
General