Appendix A • Configuring Windows network settings manually for static IP address
62
1037076-0001 Revision C
2. A list of Network adapters appears. A Local Area Connection
icon must be listed under LAN or High-Speed Internet. If it is
not, the network is not installed correctly.
3. Right-click on the Local Area Connection icon that
represents the Network adapter used to connect the computer
to the remote terminal, and select Properties.
See Figure 53.
Figure 52: Network and Dialup Connections
Note: If the Local Area Connection icon appears with a red
X, check your connections. You cannot successfully configure
your system if the red X is present.
To Next Page
Loading...
Need help?
General