Chapter 3 • Installing the HN7000S remote terminal
34
1037076-0001 Revision C
12. Click Close on the Terminal Reset screen.
The WebACS browser window closes and you are returned to
the HughesNet Activation software window.
The activation software guides you through the remainder of
the activation process. It verifies that the terminal is
commissioned, and that its software is up to date, and
configures a public IP address (if available with your service
plan).
Upon completion of this process, a new browser window
opens displaying the HughesNet Tools home page shown in
Figure 30.
Figure 29: Restarting the HN7000S remote terminal
To Next Page
Loading...
Need help?
General