Chapter 3 • Installing the HN7000S remote terminal
28
1037076-0001 Revision C
1. When the Are You Upgrading Your Modem Hardware?
screen appears as shown in
Figure 5, click Commission to
proceed.
When you click Commission, a separate browser window opens
as shown in
Figure 24. This window provides a direct link to the
HughesNet Web-based auto-commissioning system (WebACS).
Through WebACS, you will “swap out” the serial number of your
old remote terminal for new HN7000S serial number.
2. Enter your registration ID in the fields and click Next.
Figure 23: Are You Upgrading Your Modem Hardware? screen
To Next Page
Loading...
Need help?
General