5-1: Machine Maintenance
5 - Machine Maintenance
To avoid costly repairs and downtime, it is imperative to develop and practice good
maintenance procedures. These procedures fall into daily, weekly, monthly and quarterly
increments and are outlined below. All maintenance must be performed by qualied
service personnel.
A maintenance log, provided in the Owner’s Guide, must be correctly and completely lled
out. HydraMaster may request to inspect the logs before a warranty claim is honored.
It is recommended that the log be afxed to the vehicle door near the truckmount for
convenience and to serve as a maintenance reminder.
This section describes how to properly maintain the truckmount in the following areas:
Operational Maintenance
Overall Machine Maintenance
High Pressure Pump Maintenance
Vacuum System Maintenance
Descaling Procedure (Required)
Freeze Guarding
To Next Page
Loading...