9-2: Assemblies and Parts Lists 9-3: Assemblies and Parts Lists
Some of the illustrations in this section reference sealants, thread lockers, adhesive, primer, anti-
seize and lubricant specications that are used in the construction of HydraMaster equipment.
Refer to Figure 9-1 to identify those substances such as A1, A2 and so forth. Equivalent products
are acceptable if they meet or exceed current specications and are approved by HydraMaster.
Figure 9-1. Adhesive/Sealant Material Reference
Figure 9-2. Console Assembly - View 1 of 6
610-050-728 Rev. D
To Next Page
Loading...