Hypertherm DynaMAX 550P User Manual

Preventive maintenance
4
126 811390 Operator Manual DynaMAX 550P/560P/575P Waterjet Pump
Primary maintenance screen
On the operator interface, touch the maintenance symbol to open the primary maintenance screen.
1
2
3
4
5
6
1 Move the plunger
2 Start the pump after maintenance
3 Prepare for storage
4 Record maintenance
5 Inputs and outputs
6 Alarm log
Move the plunger
Touch this symbol to open the Move the Plunger screen.
Touch a symbol to shift the intensifier plunger to the left or to the right.
The unit must be in cooling mode. The cooling symbol with a hand flashes as a reminder.
Start the pump after maintenance
Touch this symbol to open the Start Procedure screen. Refer to page 126 for instructions.

Hypertherm DynaMAX 550P Specifications

General

Brand	Hypertherm
Model	DynaMAX 550P
Category	Water Pump
Language	English