Hypertherm DynaMAX 550P - High-pressure water system; Intensifier high-pressure ends

Parts lists
5
DynaMAX 550P/560P/575P Waterjet Pump Operator Manual 811390 145
High-pressure water system
Intensifier high-pressure ends
Part number Description
1-11501 Intensifier, DynaMAX 5-series
1-14688 End cover, high-pressure tubing sheath, 1/4 inch
1-14687 End cover, high-pressure tubing sheath, 3/8 inch
1-12579 High-pressure tubing sheath, 1/4 inch
1-12580 High-pressure tubing sheath, 3/8 inch
1-13162-60-6F9M Inlet adapter, 9/16-inch male × 3/8-inch female
1-12280 Attenuator assembly, 1 liter
1-11595 Attenuator assembly, 2 liter
1-17340 Bleed-down valve assembly, air actuated
1-14141 Bleed-down valve body
1-13949 Solenoid, air, bleed-down valve
1-19171
Replacement kit, air tube, bleed-down valve, 1/4 inch
1-11518 Indicator pin
1-11519 Cap, indicator pin
1-11798 Support ring, split
Part number Description
1-11530 Output adapter
1-11523 Check valve assembly
1-11521 Spacer tube
1-11522 Cylinder, high pressure
1-11609 Seal housing
1-11520 Poppet basket, low pressure
1-11608 Plunger bearing