Hypertherm DynaMAX 550P User Manual

Preventive maintenance
4
76 811390 Operator Manual DynaMAX 550P/560P/575P Waterjet Pump
Electrical system
Make sure that the emergency stop operates correctly
The EMERGENCY STOP button is found on the operation panel.
Do this task when the pump is running.
Refer to Emergency stop on page 60.
Make sure that the electrical interlock operates correctly
The electrical interlock is optional on all models with top covers.
Do this task when the pump is running.
1. Open the top cover.
2. The result is the same as described for when the EMERGENCY STOP button is pushed. Refer
to Emergency stop on page 60.
Examine cords, plugs, and cables
Do this task when the pump is not running.
1. Examine electrical cords and cables for kinks or damage to the insulation.
2. Examine electrical plugs and other electrical connections for corrosion or damage.
Do this every work shift.
Do this every work shift.
Do this every work shift.

Hypertherm DynaMAX 550P Specifications

General

Brand	Hypertherm
Model	DynaMAX 550P
Category	Water Pump
Language	English