Preventive maintenance
DynaMAX 550P/560P/575P Waterjet Pump Operator Manual 811390 135
e. Disconnect the compressed air supply hose from the utility panel.
f. On the operator interface, touch the X symbol on the screen to close the water valves.
14. Install the fitting caps and the plugs on the utility panel.
Recycling and end of product life
At the end of the life of the product or its parts, recycle or discard materials and parts. Use an
environmentally satisfactory method and in accordance with local regulations. If the product
contains substances that could cause damage to the environment, remove and dispose of them in
accordance with current local regulations. This includes liquids such as hydraulic fluid.
Make sure that dangerous substances are disposed of safely and that the correct personal
protective equipment is used. The safety specifications must be in accordance with the current local
regulations at all times.
To Next Page
Loading...
Need help?
General
