Hypertherm DynaMAX 550P - Receive and unpack the equipment

Installation
8
192 811390 Operator Manual DynaMAX 550P/560P/575P Waterjet Pump
Receive and unpack the equipment
1. Examine containers, crates, and pallets for damage.
2. Remove the equipment from the shipping crates and pallets.
3. Examine the equipment to make sure that it was not damaged during shipping. If the equipment
is damaged, a claim must be filed with the carrier.
4. Make sure that the delivery and shipping documents match the equipment that was ordered and
what was received. Report shortages or damages to the OEM or to Hypertherm Waterjet
within10 days of receipt of the equipment.
5. Make sure that these items are included with the pump.
 Dirty water container
 Intensifier repair tools
 These items are usually shipped inside the electrical enclosure:
 Key for the LOCAL-REMOTE key switch
 Key for the electrical interlock (optional)
 MicroSD card adapter
 System schematic drawings
 Optional items
 Standard tool kit
 Spare parts kit
 Repair and service kits (refer to the Parts lists section of this manual)
CAUTION
Lifting must be done by a trained operator.
Obey all work site safety requirements, the safety instructions for the lifting equipment, and
the safety information in this manual.
For easy reference, write the pump information in the back of this manual.
Boxes and parts are frequently packed in the pump, or in crates, boxes, and packaging.
Look for accessories and spare parts before discarding the packaging.