To Next Page

To Previous Page

Parts lists

138 811390 Operator Manual DynaMAX 550P/560P/575P Waterjet Pump

Tools

1-12084 DynaMAX 5-series standard Tool kit

These tools are shipped with the pump. The tool case contains all of the above items except:

 The torque wrench has a separate case.

 The granite lapping block is shipped in a wooden box.

 The breaker bar is shipped in a bag.

Part number Description Quantity

1-12091 Torque wrench, 3/4-inch drive,80 N∙m to400 N∙m(60 lbf∙ft to300 lbf∙ft) 1

1-17490 Breaker bar, 40-inch 1

1-18038 White lithium grease, 44.3 ml (1.5 fluid oz) 1

1-13537 PURE Goop halocarbon-based antiseize lubricant, 28 g (1 oz) 1

1-11111 Blue Goop oil-based antiseize lubricant, 57 g (2 oz) 1

1-13969 O-ring lubricant, petroleum-based, 113 g (4 oz.) 1

1-13972 Wrench, water filter 1

1-12020 Square-drive socket, deep, 3/4 inch × 3/4 inch 1

1-12019 Hex driver, 3/4 inch × 13-1/2 inch 1

1-12021 12-point socket, 3/4-inch square drive, 1-1/2-inch 1

1-13281 Lapping block, granite 1

1-11210-12 Lapping paper, 12 micron, 1 sheet 10

1-17522 Screw, stainless steel, 10-32 (to remove the plunger bearing) 2

1-11558 Tool, seal installation, locator 1

1-11811 Tool, seal installation, sleeve 1

1-11812 Tool, seal installation, push tool 1

1-12932 Tool, seal installation, spacer 1

1-11985 Tool, seal housing removal 1

1-17520 Cleaning brush, SMI tube 3

Hypertherm DynaMAX 550P User Manual

Questions and Answers: