Hypertherm DynaMAX 550P - Pump Fault Behavior

Installation
8
DynaMAX 550P/560P/575P Waterjet Pump Operator Manual 811390 213
Pump Fault Behavior
Empty Dirty Water
Reminder This turns the reminder feature on or off.
Reminder Time This timer determines how long the pump operates before the reminder is
displayed. The default is 200 hours.
Boost Fault Monitor The system can monitor a boost pump for fault conditions. This turns monitoring on
or off.
Fan Fault Monitor The system can monitor a heat exchanger for fault conditions. This turns monitoring
on or off.