Hypertherm DynaMAX 550P - Electrical enclosure; Operator interface; Operation panel; Dirty water container

Product description
1
DynaMAX 550P/560P/575P Waterjet Pump Operator Manual 811390 37
Electrical enclosure
Motor starters, thermal overload relays, and breakers are in the enclosure.
The primary breaker disconnect lever is on the electrical enclosure.
Primary breaker disconnect lever
Operator interface
On the operator interface, a series of screens shows equipment status and lets the operator control
the pump and the intensifier.
Operation panel
The operation panel turns the control circuit in the pump on and off and controls local and remote
pump operation.
Dirty water container
Water and hydraulic fluid captured in the drip trays goes to the dirty water container found under the
electrical enclosure.
1