350
Appendix
Appendix
(Note 1) The figure in each elongated circle indicates the maximum speed for the applicable stroke(s).
(Note 2) The payload capacity is based on operation at the rated acceleration.
(Note 3) RCS2-R**7 series actuators cannot be used as axis 5 or 6.
Stroke (mm) and maximum speed (mm/sec) (Note 1)
Payload capacity
Horizontal
Model
numbe
Vertical
Rated acceleration
Horizontal
Vertical
RCS2 (Slider type)RCS2 (Rod type)RCS2 (Arm/flat type)
Actuator Specification List
Appendix
To Next Page
Loading...
